Details

---

BUY SPA17N80C3 https://www.utsource.net/itm/p/12529447.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	800	-	V
Gate-Source Voltage	VGS	-20	-	20	V
Continuous Drain Current	ID	-	17	-	A	TC = 25°C
Pulse Drain Current	IDpeak	-	50	-	A	tp = 10 μs, IG = 4 A
Power Dissipation	PTOT	-	-	160	W	TC = 25°C
Junction Temperature	TJ	-	-	150	°C
Storage Temperature	TSTG	-55	-	150	°C
Thermal Resistance, Junction to Case	RθJC	-	0.5	-	°C/W

Instructions for Use:

1. Handling Precautions:

   • The SPA17N80C3 is sensitive to electrostatic discharge (ESD). Use proper ESD protection measures during handling and installation.
   • Avoid mechanical stress on the leads and body of the device.

2. Mounting:

   • Ensure good thermal management by using appropriate heat sinks or cooling solutions to keep the junction temperature within safe limits.
   • Follow the recommended PCB layout guidelines to minimize parasitic inductance and improve performance.

3. Biasing:

   • Apply the gate voltage (V_GS) carefully to avoid exceeding the maximum ratings. A typical operating range is from 10V to 15V for optimal performance.
   • Use a gate resistor to control the switching speed and reduce ringing.

4. Operation:

   • Ensure that the drain-source voltage (V_DS) does not exceed 800V to prevent breakdown.
   • Do not exceed the continuous drain current (I_D) of 17A at 25°C case temperature. For higher temperatures, derate the current accordingly.
   • Keep the power dissipation (P_TOT) below 160W to avoid overheating.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Observe the storage temperature range of -55°C to 150°C.

6. Testing:

   • Before installing the device, perform a visual inspection to ensure there are no physical damages.
   • Use a multimeter to check for short circuits or open circuits between the pins.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate personal protective equipment (PPE) such as gloves and safety glasses.

By adhering to these parameters and instructions, you can ensure reliable and efficient operation of the SPA17N80C3 MOSFET.

(For reference only)