Details

---

BUY SPD50P03LG https://www.utsource.net/itm/p/12529603.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	-	50	V	-
Gate-Source Voltage	VGS	-10	-	10	V	-
Continuous Drain Current	ID	-	-	0.3	A	TC = 25°C
Pulse Drain Current	ID(p)	-	-	1.5	A	tp = 10 μs, TC = 25°C
Power Dissipation	PD	-	-	0.65	W	TA = 25°C
Junction Temperature	TJ	-	-	150	°C	-
Storage Temperature	TSTG	-65	-	150	°C	-
Operating Temperature	TA	-40	-	85	°C	-

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid static discharge, which can damage the device.

2. Mounting:

   • Ensure proper alignment of the component during soldering.
   • Use a soldering iron with a temperature not exceeding 350°C.
   • Soldering time should not exceed 10 seconds per connection.

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals as per the circuit diagram.
   • Ensure that the maximum ratings for voltage, current, and power dissipation are not exceeded.

4. Thermal Management:

   • For applications where the power dissipation is close to the maximum, use a heatsink to maintain the junction temperature within safe limits.
   • Monitor the operating temperature to ensure it does not exceed 150°C.

5. Testing:

   • Before final assembly, test the component using a multimeter or an appropriate testing device to verify its functionality.
   • Ensure that the gate-source voltage (V_GS) is within the specified range to avoid damage.

6. Safety:

   • Always follow safety guidelines when working with electrical components.
   • Use appropriate personal protective equipment (PPE) such as gloves and goggles.

7. Compliance:

   • Ensure that the component complies with relevant industry standards and regulations for your specific application.

(For reference only)