Details

---

BUY EPM7064LC44-15 https://www.utsource.net/itm/p/12532066.html

Parameter	Description	Value
Device Type	Family	MAX 7000S
Package	Type	LC (Leadless Ceramic)
Number of Pins	-	44
Logic Cells	-	64
I/O Pins	-	32
Maximum Frequency (fMAX)	-	150 MHz
Supply Voltage (VCC)	-	3.3V to 5.5V
Operating Temperature Range	-	-40°C to +85°C
Configuration Memory	-	2560 bits
Configuration Method	-	AS (Active Serial), ISP (In-System Programming)
Power Consumption	Typical (at fMAX)	100 mW
Standby Current	-	1 μA
Input/Output Standards	-	TTL, CMOS, LVTTL, LVCMOS
Pin-to-Pin Delay	-	5 ns (typical)
Package Body Size	-	10 mm x 10 mm
Lead Pitch	-	0.8 mm

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range (3.3V to 5.5V).
   • Connect V_CC to all power pins and GND to all ground pins.

2. Configuration:

   • Use the Active Serial (AS) or In-System Programming (ISP) method to configure the device.
   • Follow the specific configuration data format and protocol provided in the device datasheet.

3. Input/Output Handling:

   • Set the input/output standards according to your application requirements (TTL, CMOS, LVTTL, LVCMOS).
   • Ensure proper pull-up or pull-down resistors are used for inputs to avoid floating states.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
   • Avoid exposing the device to temperatures outside this range for extended periods.

5. Signal Integrity:

   • Keep signal traces as short as possible to minimize noise and reflections.
   • Use decoupling capacitors close to the power pins to reduce noise on the power supply lines.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, static-free environment.

7. Testing:

   • After configuration, test the device using a known good test pattern to verify correct operation.
   • Monitor power consumption and temperature during testing to ensure they remain within safe limits.

8. Documentation:

   • Refer to the device datasheet for detailed specifications and application notes.
   • Consult the programming manual for specific configuration and programming procedures.

(For reference only)