Details

---

BUY FDS2572 https://www.utsource.net/itm/p/12532372.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	30	-	V	Continuous
Gate-Source Voltage	VGS	-10	-	10	V	Continuous
Continuous Drain Current	ID	-	1.8	-	A	TC = 25°C, VDS = 30V, VGS = 4.5V
Continuous Drain Current	ID	-	1.2	-	A	TC = 70°C, VDS = 30V, VGS = 4.5V
Pulse Drain Current	ID(p)	-	2.5	-	A	TC = 25°C, tp = 300μs, fp = 10Hz, VDS = 30V, VGS = 4.5V
RDS(on) at VGS = 4.5V	RDS(on)	-	0.16	-	Ω	TJ = 25°C
RDS(on) at VGS = 4.5V	RDS(on)	-	0.24	-	Ω	TJ = 125°C
Gate Charge	QG	-	15	-	nC	VGS = 10V, VDS = 10V, ID = 1A
Input Capacitance	Ciss	-	190	-	pF	VDS = 10V, f = 1MHz
Output Capacitance	Coss	-	45	-	pF	VDS = 10V, f = 1MHz
Reverse Transfer Capacitance	Crss	-	25	-	pF	VDS = 10V, f = 1MHz
Total Power Dissipation	PTOT	-	1.1	-	W	TA = 25°C, RθJA = 60°C/W
Junction-to-Ambient Thermal Resistance	RθJA	-	60	-	°C/W	-
Operating Junction Temperature Range	TJ	-40	-	150	°C	-

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical stress.
   • Use appropriate anti-static measures to prevent damage from electrostatic discharge (ESD).

2. Power Supply and Biasing:

   • Apply the gate-source voltage (V_GS) within the specified range to control the drain-source current (I_D).
   • Ensure that the drain-source voltage (V_DS) does not exceed the maximum rating to avoid breakdown.

3. Thermal Management:

   • The device should be mounted on a heatsink or a PCB with adequate thermal dissipation to keep the junction temperature within the operating range.
   • Monitor the temperature to ensure it does not exceed 150°C.

4. Pulse Operation:

   • For pulse operation, ensure that the pulse width and frequency are within the specified limits to avoid overheating and damage.

5. Capacitance Considerations:

   • Take into account the input, output, and reverse transfer capacitances when designing the circuit to ensure stability and performance.

6. Storage and Transportation:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Follow recommended storage conditions to maintain the reliability of the device.

7. Testing and Troubleshooting:

   • Use a multimeter or an oscilloscope to verify the correct operation of the device.
   • If the device fails, check for overvoltage, overcurrent, or thermal issues.

(For reference only)