Details

---

BUY UC1843AJ https://www.utsource.net/itm/p/12532380.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	10	-	40	V
Operating Temperature	Topr	Junction	-40	-	125	°C
Storage Temperature	Tstg		-65	-	150	°C
Switching Frequency	fsw	Typical	-	1	500	kHz
Current Limit Threshold	Ilim	Vcc = 15V	0.5	-	1.5	A
Dead Time	tdead		50	-	100	ns
Propagation Delay	tp	Rising Edge	100	-	200	ns
Maximum Duty Cycle	Dmax		-	90	-	%

Instructions for UC1843AJ

1. Power Supply Connection:

   • Connect the power supply to the Vcc pin ensuring it is within the specified operating range of 10V to 40V.

2. Temperature Management:

   • Ensure the device operates within the temperature range of -40°C to 125°C for optimal performance. For storage, ensure temperatures are between -65°C and 150°C.

3. Setting Switching Frequency:

   • The switching frequency can be set up to a maximum of 500kHz. Adjust external components as necessary to achieve desired frequency.

4. Current Limit Adjustment:

   • Set the current limit threshold by adjusting the resistor connected to the Ilim pin. Ensure this setting is within the 0.5A to 1.5A range when Vcc is 15V.

5. Dead Time Configuration:

   • Configure dead time between 50ns and 100ns to prevent cross-conduction in half-bridge configurations.

6. Propagation Delay Consideration:

   • Account for propagation delays ranging from 100ns to 200ns in your timing calculations to ensure proper signal processing.

7. Duty Cycle Limitation:

   • Do not exceed a 90% duty cycle to maintain stable operation and avoid potential damage to the device.

8. General Handling:

   • Follow standard handling precautions for electronic components to avoid damage due to electrostatic discharge (ESD) or mechanical stress.

(For reference only)