Details

---

BUY FDPF51N25 https://www.utsource.net/itm/p/12532382.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	250	-	V
Gate-Source Voltage	VGS	-15	-	20	V
Continuous Drain Current	ID	-	44	-	A	TC = 25°C
Power Dissipation	PTOT	-	180	-	W	TC = 25°C, Rth(j-c) = 0.63 K/W
Junction Temperature	TJ	-	-	175	°C
Storage Temperature	TSTG	-55	-	150	°C
Total Gate Charge	QG	-	40	-	nC	VGS = 15V, VDS = 250V, ID = 44A
Input Capacitance	Ciss	-	1900	-	pF	VDS = 250V, f = 1 MHz
Output Capacitance	Coss	-	180	-	pF	VDS = 250V, f = 1 MHz
Reverse Transfer Capacitance	Crss	-	200	-	pF	VDS = 250V, f = 1 MHz
On-State Resistance	RDS(on)	-	0.055	-	Ω	VGS = 10V, ID = 44A, TJ = 25°C
Turn-On Delay Time	td(on)	-	55	-	ns	VDS = 250V, ID = 44A, VGS = 15V, Rg = 1Ω
Rise Time	tr	-	40	-	ns	VDS = 250V, ID = 44A, VGS = 15V, Rg = 1Ω
Turn-Off Delay Time	td(off)	-	65	-	ns	VDS = 250V, ID = 44A, VGS = 15V, Rg = 1Ω
Fall Time	tf	-	35	-	ns	VDS = 250V, ID = 44A, VGS = 15V, Rg = 1Ω

Instructions for Use:

1. Handling and Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress on the leads and body.

2. Mounting:

   • Ensure proper heat sinking to manage thermal dissipation.
   • Use recommended torque values for screw terminals to avoid damage.

3. Electrical Connections:

   • Connect the gate and source terminals carefully to avoid short circuits.
   • Use appropriate gate drive circuits to ensure reliable operation.

4. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Monitor junction temperature to ensure it remains within safe limits.

5. Testing:

   • Perform initial testing under controlled conditions to verify performance.
   • Use recommended test circuits and procedures to avoid damaging the device.

6. Safety:

   • Follow all safety guidelines when handling high-voltage and high-current circuits.
   • Use protective equipment such as gloves and safety glasses.

7. Environmental Considerations:

   • Dispose of the device according to local environmental regulations.
   • Ensure compliance with RoHS and other relevant standards.

(For reference only)