Details

---

BUY DSD625-25D https://www.utsource.net/itm/p/12532396.html

Parameter	Value	Unit
Device Type	Diode	-
Maximum Reverse Voltage (VR)	600	V
Maximum Forward Current (IF)	25	A
Peak Forward Surge Current (IFSM)	400	A
Operating Temperature Range (Top)	-55 to +175	°C
Storage Temperature Range (Tstg)	-65 to +150	°C
Junction Capacitance (CJ)	300	pF
Reverse Recovery Time (trr)	350	ns
Package Type	TO-220	-

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a heatsink if operating at high currents to prevent overheating.
   • Use a thermal compound between the device and the heatsink for better heat dissipation.

2. Soldering:

   • Preheat the PCB to reduce thermal shock.
   • Soldering temperature should not exceed 260°C for more than 10 seconds.
   • Avoid mechanical stress on the leads during soldering.

3. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse breakdown.
   • Use appropriate wire gauge to handle the maximum forward current.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid physical damage.

5. Testing:

   • Test the diode using a multimeter to ensure it is functioning correctly before installation.
   • Check for any short circuits or open circuits.

6. Safety:

   • Always disconnect power before handling the device.
   • Follow all relevant safety guidelines and regulations when working with electrical components.

(For reference only)