Details

---

BUY YX8182B https://www.utsource.net/itm/p/12532398.html

Parameter	Description	Value
Operating Voltage	Supply voltage range for the device	2.0V to 5.5V
Operating Current	Typical current consumption	1.2mA (typical)
Output Power	Maximum output power	3W
Frequency Range	Frequency range supported by the device	76MHz to 108MHz
Audio Output	Line out audio signal level	1Vrms
Signal Sensitivity	Minimum input signal required for operation	-10dBu
Temperature Range	Operating temperature range	-20°C to +70°C
Package Type	Type of package	SOP-8

Instructions for YX8182B

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the VCC pin and the negative terminal to the GND pin.
   • Ensure the supply voltage is within the specified range (2.0V to 5.5V).

2. Antenna Connection:

   • Connect an appropriate antenna to the ANT pin for optimal reception.

3. Audio Input:

   • Connect the audio source to the audio input pins (AINL, AINR) ensuring the signal level does not exceed the maximum input level.

4. Output Configuration:

   • The line out audio can be connected directly to a speaker or amplifier with impedance matching considerations.

5. Operating Environment:

   • Place the device in an environment within the specified temperature range (-20°C to +70°C) to ensure reliable operation.

6. Frequency Tuning:

   • Use the provided control interface to set the desired frequency within the 76MHz to 108MHz range.

7. Signal Level Adjustment:

   • Adjust the input signal sensitivity as needed using the controls provided to avoid distortion.

8. Installation and Handling:

   • Handle the component carefully to avoid damage to the pins and ensure proper soldering according to the SOP-8 package guidelines.

(For reference only)