Details

---

BUY XC2C128-7VQG100C https://www.utsource.net/itm/p/12532435.html

Parameter	Description	Value
Device Type	Complex Programmable Logic Device (CPLD)	XC2C128
Package Type	VQG100 (100-pin Very Thin Quad Flat Package)	VQG100
Operating Voltage (Vcc)	Supply Voltage for the device	3.3V
I/O Voltage (Vcco)	Input/Output Voltage	3.3V, 2.5V, 1.8V
Configuration Voltage (Vcco)	Configuration Voltage	3.3V, 2.5V, 1.8V
Configuration Mode	In-System Programmable (ISP)	JTAG, Serial
Logic Cells	Number of Logic Cells	128
Macrocells	Number of Macrocells	128
Flip-Flops	Number of Flip-Flops	128
Look-Up Tables (LUTs)	Number of LUTs	128
I/O Pins	Number of I/O Pins	72
Maximum Frequency	Maximum Operating Frequency	150 MHz
Temperature Range	Operating Temperature Range	-40°C to +85°C
Package Size	Dimensions of the Package	14 mm x 14 mm
Pin Pitch	Distance Between Pins	0.5 mm
Configuration Memory	Non-Volatile Configuration Memory	64 kbits
Power Consumption	Typical Power Consumption (static)	5 mW
Dynamic Power	Dynamic Power Consumption	10 mW/MHz
Standby Current	Standby Current	10 μA
ESD Protection	Electrostatic Discharge Protection	HBM: 2000V, MM: 200V
RoHS Compliance	Compliance with Restriction of Hazardous Substances Directive	Yes

Instructions for Use:

1. Power Supply:

   • Ensure that the Vcc is set to 3.3V.
   • The Vcco can be set to 3.3V, 2.5V, or 1.8V depending on the I/O standards being used.

2. Configuration:

   • Use JTAG or Serial mode for in-system programming.
   • Ensure the configuration voltage (Vcco) matches the selected I/O standard.

3. Operating Conditions:

   • Operate the device within the temperature range of -40°C to +85°C.
   • Ensure proper heat dissipation if operating at high frequencies.

4. Signal Integrity:

   • Use appropriate decoupling capacitors close to the power pins to minimize noise.
   • Ensure all unused I/O pins are either tied to Vcc or GND to prevent floating states.

5. Handling:

   • Handle the device with care to avoid ESD damage.
   • Follow proper handling procedures as specified by the RoHS compliance guidelines.

6. Testing:

   • Verify the configuration and functionality using boundary scan testing via JTAG.
   • Perform functional tests to ensure the device meets the design specifications.

7. Storage:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Use anti-static bags for long-term storage.

8. Documentation:

   • Refer to the datasheet and user guide for detailed information on pinout, timing diagrams, and advanced features.

(For reference only)