Details

---

BUY AM26LS31CDRE4 https://www.utsource.net/itm/p/12532576.html

Parameter	Description	Value
Device Type	8-Bit Bus Transceiver with 3-State Outputs	AM26LS31CDRE4
Supply Voltage	Operating supply voltage	4.5V to 5.5V
Operating Temperature	Industrial temperature range	-40°C to +85°C
Input Voltage (VIH)	Minimum input high voltage	2.0V
Input Voltage (VIL)	Maximum input low voltage	0.8V
Output Voltage (VOH)	Minimum output high voltage	2.4V at 4.5V VCC
Output Voltage (VOL)	Maximum output low voltage	0.5V at 4.5V VCC
Propagation Delay	Time delay from input to output	12ns (typical)
Power Dissipation	Maximum power dissipation	100mW per package
Mounting Type	Surface mount
Package Type	TSSOP (Thin Small Outline Package)

Instructions for Use:

1. Power Supply Connection: Connect the VCC pin to a 4.5V to 5.5V power supply and GND pin to ground.
2. Signal Lines: Ensure that all signal lines are properly connected according to your circuit design. The device supports bidirectional data transfer between two buses.
3. Direction Control: Use the direction control (DIR) pin to specify the direction of data flow. High on DIR sets data flow from A to B; low sets it from B to A.
4. Enable Pin: The enable (OE) pin controls the output state. When OE is high, the outputs are in a high-impedance state. When OE is low, the transceiver is active.
5. Decoupling Capacitors: Place decoupling capacitors close to the VCC and GND pins to minimize noise and ensure stable operation.
6. Handling Precautions: Handle with care to avoid ESD damage. Follow standard anti-static procedures when handling the component.

For detailed specifications and advanced applications, refer to the datasheet provided by the manufacturer.

(For reference only)