Details

---

BUY M25P128-VME6TGB https://www.utsource.net/itm/p/12532599.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	2.7	-	3.6	V
Standby Current	Icc	-	1	5	μA
Active Current	Icc	-	30	50	mA
Programming Current	Ipp	-	5	10	mA
Erase Time (Sector)	tErase	-	200	400	ms
Program Time (Byte)	tProg	-	2	5	ms
Read Access Time	tACC	-	60	70	ns
Data Retention	-	-	100	-	Years
Operating Temperature	Toper	-40	-	85	°C
Storage Temperature	Tstg	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 3.6V.
   • The device should be powered with a stable and regulated power source.

2. Current Considerations:

   • The standby current (Icc) is typically around 1 μA but can go up to 5 μA.
   • The active current (Icc) is typically around 30 mA but can go up to 50 mA.
   • The programming current (Ipp) is typically around 5 mA but can go up to 10 mA.

3. Timing Parameters:

   • Sector erase time (tErase) is typically 200 ms but can take up to 400 ms.
   • Byte program time (tProg) is typically 2 ms but can take up to 5 ms.
   • Read access time (tACC) is typically 60 ns but can be up to 70 ns.

4. Temperature Range:

   • The operating temperature (Toper) should be between -40°C and 85°C.
   • The storage temperature (Tstg) should be between -65°C and 150°C.

5. Data Retention:

   • The device is designed to retain data for at least 100 years under normal operating conditions.

6. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry and cool environment to ensure long-term reliability.

7. Programming and Erasing:

   • Follow the specific command sequences provided in the datasheet for sector erasing and byte programming.
   • Ensure proper timing and voltage levels during these operations to prevent data corruption.

8. Read Operations:

   • Use the appropriate read commands and timing parameters to access data from the memory.

9. Error Handling:

   • Implement error-checking mechanisms to ensure data integrity during read, write, and erase operations.

10. Compliance:

    • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)