Details

---

BUY PCM4104 https://www.utsource.net/itm/p/12532606.html

Parameter	Description	Value
Supply Voltage	Operating voltage range for the device	2.7V to 5.5V
Sampling Rate	Supported sampling rates	Up to 192 kHz
SNR (Signal-to-Noise Ratio)	Ratio of signal power to noise power, typically in dB	108 dB
THD+N (Total Harmonic Distortion + Noise)	Measurement of harmonic distortion and noise relative to fundamental signal	-103 dB
Power Consumption	Typical power consumption at specified conditions	4 mW (at 48 kHz)
Channels	Number of audio channels supported	4
Interface Type	Type of digital interface supported	I2S, TDM
Package Type	Physical package type of the component	SSOP-24

Instructions:

1. Power Supply Requirements: Ensure that the supply voltage is within the specified range of 2.7V to 5.5V.
2. Configuration: Set up the PCM4104 using the provided configuration registers via SPI/I2C or similar interfaces depending on the application setup.
3. Clocking: Provide a stable clock source that matches the desired sampling rate (up to 192 kHz).
4. Audio Data Handling: Use the I2S or TDM interface to transmit and receive audio data. Ensure proper synchronization with connected devices.
5. Power Management: To minimize power consumption, especially in battery-operated applications, consider using the power-down modes available.
6. Installation: Mount the SSOP-24 package on the PCB ensuring correct orientation and soldering as per datasheet guidelines.
7. Testing: After installation, test the device for functionality including SNR and THD+N performance to ensure it meets specifications.

(For reference only)