Details

---

BUY TLP620-4(GB,F) https://www.utsource.net/itm/p/12532642.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	1.2	1.5	V	IF = 20 mA
Peak Forward Current	IF(P)	-	-	1.5	A	tP = 10 ms, Duty Cycle ≤ 1%
Continuous Forward Current	IF	-	-	30	mA	TA = 25°C
Reverse Voltage	VR	-	-	5	V	TA = 25°C
Reverse Current	IR	-	-	100	μA	VR = 5 V, TA = 25°C
Output Current (Per Channel)	IC	-	0.5	1.0	A	VCE(sat) = 1.2 V, RL = 300 Ω
Total Output Current (All Channels)	IC(Total)	-	1.5	3.0	A	VCE(sat) = 1.2 V, RL = 300 Ω
Collector-Emitter Saturation Voltage	VCE(sat)	-	1.2	1.5	V	IC = 1.0 A, IF = 20 mA
Turn-On Time	ton	-	2	5	μs	IF = 20 mA, IC = 100 mA, VDD = 5 V
Turn-Off Time	toff	-	2	5	μs	IF = 20 mA, IC = 100 mA, VDD = 5 V
Storage Temperature Range	TSTG	-40	-	85	°C	-
Operating Temperature Range	TA	-40	-	85	°C	-

Instructions for Use:

1. Power Supply:

   • Ensure the power supply voltage is within the specified range to avoid damage.
   • Use appropriate decoupling capacitors to stabilize the power supply.

2. Input Current:

   • The forward current (I_F) should not exceed 30 mA continuously.
   • For peak conditions, ensure the peak forward current (I_F(P)) does not exceed 1.5 A for short durations (t_P = 10 ms, Duty Cycle ≤ 1%).

3. Output Current:

   • Each channel can handle up to 1.0 A continuously.
   • The total output current for all channels combined should not exceed 3.0 A.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Ensure adequate heat dissipation if operating at high currents or temperatures.

5. Signal Integrity:

   • Use short leads to minimize inductance and capacitance effects.
   • Ensure proper grounding and shielding to reduce noise interference.

6. Mounting:

   • Follow the recommended PCB layout guidelines to ensure reliable operation.
   • Use appropriate mounting techniques to secure the device and prevent mechanical stress.

7. Testing:

   • Before finalizing the design, test the device under various operating conditions to ensure it meets the required specifications.
   • Verify turn-on and turn-off times to ensure they are within the specified limits.

8. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid static discharge which can damage the device.

By following these parameters and instructions, you can ensure the TLP620-4(GB,F) operates reliably and efficiently in your application.

(For reference only)