Details

---

BUY MAX4634EUB+ https://www.utsource.net/itm/p/12532815.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7	-	5.5	V
Output Voltage	VO	VIN = 2.7V to 5.5V	-	0	-	V
Input Offset Voltage	VOS	VIN = 2.7V to 5.5V	-	1.5	-	mV
Input Bias Current	IB	VIN = 2.7V to 5.5V	-	0.4	-	nA
Slew Rate	SR	Short Circuit	-	0.8	-	V/μs
Bandwidth	GBW	Small Signal	-	10	-	MHz
Quiescent Current	IQ	VIN = 2.7V to 5.5V	-	30	-	μA
Common Mode Rejection	CMRR	f = 0.1Hz to 10Hz	-	98	-	dB
Power Supply Rejection	PSRR	f = 0.1Hz to 10Hz	-	96	-	dB

Instructions for MAX4634EUB+

1. Power Supply Requirements:

   • Ensure the supply voltage (VCC) is within the range of 2.7V to 5.5V for optimal operation.

2. Input Signal Handling:

   • The input bias current is very low, making it suitable for high-impedance sources. Be mindful of this when connecting signal sources to minimize loading effects.

3. Output Considerations:

   • The output can swing close to the rails, but check the specific output voltage levels in your application setup.

4. Slew Rate and Bandwidth:

   • For applications requiring fast transient response or wide bandwidth, verify that the slew rate of 0.8 V/μs and bandwidth of 10 MHz meet your needs.

5. Power Consumption:

   • With a quiescent current of 30 μA, the device is energy-efficient, suitable for battery-powered applications.

6. Noise and Interference Mitigation:

   • Utilize the common mode rejection ratio (CMRR) and power supply rejection ratio (PSRR) to maintain signal integrity in noisy environments.

7. Short-Circuit Protection:

   • The device includes short-circuit protection at the output; however, design external circuitry to limit current and protect against prolonged short circuits.

8. Operating Temperature Range:

   • Check the manufacturer’s datasheet for the operating temperature range to ensure reliability in your intended environment.

For detailed specifications and further instructions, refer to the official Maxim Integrated datasheet for the MAX4634EUB+.

(For reference only)