Details

---

BUY TOSHIBA TLP290-4(GB-TP,E(T https://www.utsource.net/itm/p/12532816.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 10mA		1.2	1.5	V
Peak Forward Current	IFP	tP = 1ms, Repetition Rate ≤ 100Hz			50	mA
Continuous Forward Current	IF	Tj = 25°C			10	mA
Reverse Voltage	VR				7	V
Reverse Current	IR	VR = 7V	-100		100	nA
Output Leakage Current	IOL	VDD = 30V, Tj = 25°C	-100		100	nA
Isolation Voltage	BVS	See Note 1			2500	Vrms
Propagation Delay Time	tpLH,tpHL	IF = 10mA, VLED = 5V, RL = 100Ω		1.8	4.0	μs
Pulse Width Distortion	tpD	IF = 10mA, VLED = 5V, RL = 100Ω		0.2	0.6	μs

Instructions for Use:

1. Mounting and Handling:

   • Handle the device with care to avoid damage to leads and body.
   • Ensure correct orientation during mounting to prevent short circuits.

2. Electrical Connections:

   • Connect the forward current (IF) within the specified limits to avoid overheating.
   • Ensure reverse voltage (VR) does not exceed the maximum rating to prevent breakdown.

3. Thermal Management:

   • Maintain junction temperature (Tj) within operational limits to ensure reliability.
   • Provide adequate heat sinking if operating near maximum current or in high ambient temperatures.

4. Isolation Considerations:

   • The isolation voltage (BVS) specifies the maximum voltage that can be safely applied between input and output under normal conditions.
   • Ensure the insulation is not compromised by physical stress or contamination.

5. Timing Parameters:

   • Account for propagation delay time (tpLH,tpHL) and pulse width distortion (tpD) in timing-sensitive applications.

6. Storage and Operating Temperature:

   • Store in a dry, cool place away from direct sunlight.
   • Operate within the specified temperature range to avoid performance degradation or failure.

Note 1: Isolation voltage is tested at an altitude of less than 2000m. For higher altitudes, derating may be necessary.

(For reference only)