Details

---

BUY MAX4450EUK+T https://www.utsource.net/itm/p/12532904.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating range	2.7		5.5	V
Output Current (Short Circuit)	IOUT(SC)	Short circuit duration			30	mA
Quiescent Current	IQ	VCC = 5.5V		1.8		μA
Input Offset Voltage	VOS		±1		±3	mV
Slew Rate	SR			450		V/μs
Bandwidth	BW	G = +1, RL = 1kΩ		160		MHz
Large Signal Voltage Gain	AV	G = +1		130		dB
Input Bias Current	IB		±2		±10	nA
Output Swing	VSWING	RL = 1kΩ			VCC-1.2	V

Instructions for MAX4450EUK+T:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the operating range of 2.7V to 5.5V.

2. Installation:

   • Place the device on a PCB with adequate grounding and decoupling capacitors close to the power pins to minimize noise and ensure stability.

3. Input Signals:

   • The input signals should be within the common-mode input voltage range specified in the datasheet.
   • Avoid exceeding the maximum differential input voltage to prevent damage or degradation of performance.

4. Output Configuration:

   • For optimal performance, connect a load resistor (RL) of 1kΩ as indicated in the bandwidth measurement conditions.
   • Ensure that the output does not exceed the swing limits to avoid distortion or clipping.

5. Handling Precautions:

   • Handle the device with care to avoid ESD damage. Use proper ESD protection measures when handling or soldering.
   • Follow the manufacturer’s guidelines for soldering temperature and duration to prevent thermal damage.

6. Application Notes:

   • Refer to the application notes provided by Maxim Integrated for detailed design considerations and typical applications.
   • Consider using the device in high-speed signal processing applications where low quiescent current and high bandwidth are critical.

(For reference only)