Details

---

BUY THS4031IDGN https://www.utsource.net/itm/p/12532917.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	Vcc	2.7	-	5.5	V
Quiescent Current	IQ	-	1.4	-	mA	AVdd = DVdd, RL = 1kΩ to ground
Output Swing	Vos	-0.8	-	1.9	Vpp	AVdd = DVdd = 3V, RL = 1kΩ to ground
Bandwidth	BW	-	210	-	MHz	G = +2, AVdd = DVdd = 5V
Slew Rate	SR	-	650	-	V/μs	G = +2, AVdd = DVdd = 5V
Input Offset Voltage	Vio	-	1.5	-	mV	AVdd = DVdd = 5V
Input Bias Current	Iib	-	0.8	-	nA	AVdd = DVdd = 5V
CMRR	CMRR	-	78	-	dB	G = +2, AVdd = DVdd = 5V, f = 1kHz
PSRR	PSRR	-	78	-	dB	G = +2, AVdd = DVdd = 5V, f = 1kHz
Noise (Voltage)	en	-	6.5	-	nV/√Hz	AVdd = DVdd = 5V, f = 1kHz
Operating Temperature	Temp	-40	-	125	°C	Storage Temperature Range

Instructions for THS4031IDGN

1. Power Supply: Ensure the supply voltage is within the specified range of 2.7V to 5.5V. The device operates optimally at voltages within this range.

2. Quiescent Current Management: The quiescent current is typically 1.4mA. Design your power supply and circuit to handle this current consumption efficiently.

3. Output Swing Considerations: The output can swing from -0.8V to +1.9V peak-to-peak when operating at 3V supply with a 1kΩ load to ground. Ensure that downstream components can handle this output range.

4. Bandwidth Utilization: The amplifier has a typical bandwidth of 210MHz at a gain of +2. Adjust your signal frequencies accordingly to stay within this operational bandwidth.

5. Slew Rate: With a typical slew rate of 650V/μs, ensure that high-frequency signals do not exceed this rate to avoid distortion.

6. Input Handling: Be mindful of the input offset voltage (typically 1.5mV) and input bias current (typically 0.8nA). These parameters affect the accuracy of your signal processing.

7. Noise Reduction: The voltage noise density is 6.5nV/√Hz at 1kHz. Use proper grounding and shielding techniques to minimize external noise interference.

8. Temperature Range: The device is designed to operate between -40°C and 125°C. Ensure that environmental conditions are within this range to maintain performance specifications.

9. Layout Guidelines: Follow recommended PCB layout practices, including short trace lengths for inputs and outputs, and adequate decoupling capacitors close to the power pins.

10. Storage Temperature: Store the device in environments where temperatures do not exceed the storage temperature range (-40°C to 125°C) to prevent damage.

(For reference only)