Details

---

BUY AMC1200SDUBR https://www.utsource.net/itm/p/12533224.html

Parameter	Description	Value	Unit
Supply Voltage (VDD)	Operating supply voltage range	4.5 to 5.5	V
Common-Mode Input Voltage Range	Range of common-mode input voltages	-0.3 to VDD + 0.3	V
Differential Input Voltage Range	Maximum differential input voltage	卤0.25	V
Output Data Rate	Maximum output data rate	10	Mbps
Isolation Voltage	Rated isolation voltage (VIORM)	7000	Vrms
Insulation Lifetime	Expected insulation lifetime at rated conditions	> 50	years
Operating Temperature Range	Ambient temperature range for operation	-40 to 125	掳C
Storage Temperature Range	Temperature range for storage	-65 to 150	掳C
Power Consumption	Typical power consumption at 5 V	10	mA
Package Type	Package type and pin count	SOIC-8	-
Pin Configuration	Pin configuration details	See datasheet for detailed pinout	-

Instructions for Use:

1. Power Supply:

   • Connect the VDD pin to a stable 5 V supply.
   • Connect the GND pin to the system ground.

2. Input Connections:

   • Connect the differential input signals to the IN+ and IN- pins.
   • Ensure that the common-mode input voltage is within the specified range.

3. Output Connections:

   • Connect the differential output signals to the OUT+ and OUT- pins.
   • The output data rate should not exceed 10 Mbps.

4. Isolation:

   • Ensure that the isolation barrier is maintained by keeping the common-mode input voltage within the specified range.
   • Do not exceed the rated isolation voltage to prevent damage to the device.

5. Temperature Considerations:

   • Operate the device within the specified temperature range to ensure reliable performance.
   • Store the device in a temperature-controlled environment to avoid degradation.

6. Handling Precautions:

   • Handle the device with care to avoid mechanical stress or damage to the pins.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

7. Testing and Troubleshooting:

   • Use a calibrated multimeter to verify the supply voltage and ground connections.
   • Check the input and output signals using an oscilloscope to ensure proper operation.
   • Refer to the datasheet for detailed troubleshooting steps and additional information.

(For reference only)