Details

---

BUY ADXL202ENGWASA https://www.utsource.net/itm/p/12533226.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7	-	5.25	V
Output Voltage	VOUT	No Load	-	0.4	1.8	V
Bandwidth	BW	Typical	-	50	500	Hz
Sensitivity	SENS	X or Y Axis	300	400	500	mV/g
Zero-g Offset	ZO	X or Y Axis	-300	0	300	mV
Power Consumption	ICC	Active Mode	-	100	-	μA
Temperature Range	T	Operating	-40	-	85	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the range of 2.7V to 5.25V.
   • Connect the power supply to the VDD pin and ground to the GND pin.

2. Signal Output:

   • The output voltage can range from 0.4V to 1.8V under no load conditions.
   • Connect the output pins (Xout, Yout) to your signal processing circuitry.

3. Bandwidth Configuration:

   • Set the desired bandwidth using external components if necessary, as the typical bandwidth ranges from 50Hz to 500Hz.

4. Sensitivity Adjustment:

   • Adjust sensitivity settings based on application requirements; it typically ranges from 300mV/g to 500mV/g.

5. Zero-g Offset Calibration:

   • Calibrate the zero-g offset to ensure accurate readings, which can vary between -300mV and 300mV.

6. Power Management:

   • Keep power consumption in mind, with typical active mode consumption around 100μA.

7. Operating Environment:

   • Ensure the device operates within the temperature range of -40°C to 85°C for reliable performance.

For detailed specifications and more advanced configurations, refer to the official datasheet provided by Analog Devices.

(For reference only)