Details

---

BUY SP213EHCA-L/TR https://www.utsource.net/itm/p/12533230.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Operating Temperature	Topr	-40		85	°C
Storage Temperature	Tstg	-65		150	°C
Input Voltage (High)	VIH	3.0		5.5	V
Input Voltage (Low)	VIL	0		0.8	V
Output Current (Sink)	IOL		10	20	mA
Output Current (Source)	IOH		-10	-20	mA
Propagation Delay Time	tpd	5	7	10	ns
Power Consumption	Pd		100		mW

Instructions for SP213EHCA-L/TR

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Operating Temperature:

   • The device is designed to operate within a temperature range of -40°C to 85°C. Ensure the ambient temperature does not exceed these limits.

3. Storage Temperature:

   • Store the device in an environment with temperatures ranging from -65°C to 150°C to prevent degradation.

4. Input Voltage Levels:

   • For the input to be recognized as high, the voltage should be between 3.0V and 5.5V.
   • For the input to be recognized as low, the voltage should be between 0V and 0.8V.

5. Output Current:

   • The device can sink up to 20mA and source up to -20mA. Ensure the load connected to the output does not exceed these current ratings.

6. Propagation Delay:

   • The propagation delay time is typically 7ns but can range from 5ns to 10ns. This should be considered in timing-sensitive applications.

7. Power Consumption:

   • The typical power consumption of the device is 100mW. Ensure the power supply can handle this load.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use appropriate ESD protection measures when handling or soldering the device.

9. Mounting and Soldering:

   • Follow recommended soldering profiles to ensure proper bonding without causing thermal stress.
   • Avoid excessive heat during soldering to prevent damage to the device.

10. Testing:

    • Before integrating the device into a circuit, test it according to the specified parameters to ensure it meets the required performance criteria.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)