Details

---

BUY STGIPQ3H60T-HZ https://www.utsource.net/itm/p/12533231.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	13.2	15	16.5	V	Power supply voltage
Input High Level Voltage	VIH	2	-	7	V	Input high level voltage
Input Low Level Voltage	VIL	-0.5	-	1.5	V	Input low level voltage
Output Current	IO	-	40	-	A	Maximum output current
Gate Charge	Qg	-	150	-	nC	Total gate charge
Switching Frequency	fSW	-	-	100	kHz	Recommended switching frequency
Junction Temperature	TJ	-40	-	150	°C	Operating junction temperature

Instructions for STGIPQ3H60T-HZ

1. Power Supply Connection: Connect the VCC pin to a stable power supply within the specified range (13.2V to 16.5V).

2. Input Signal Levels:

   • Ensure input signals are within the valid range: high level (2V to 7V) and low level (-0.5V to 1.5V).
   • Avoid exceeding these levels to prevent damage or incorrect operation.

3. Load Handling:

   • The device can handle up to 40A of output current.
   • Ensure that the load does not exceed this limit to avoid overheating or damage.

4. Gate Drive Requirements:

   • Be aware of the total gate charge (Qg) which is 150nC.
   • This value is crucial for determining the driver requirements and ensuring efficient switching.

5. Switching Frequency:

   • Operate the device at frequencies up to 100kHz for optimal performance.
   • Higher frequencies may lead to increased switching losses.

6. Thermal Management:

   • Monitor the junction temperature, which should be kept between -40°C and 150°C.
   • Use appropriate heatsinking if necessary to maintain operating temperatures within safe limits.

7. Installation and Handling:

   • Follow standard ESD precautions when handling the device.
   • Ensure proper installation to avoid mechanical stress on the package.

8. Refer to Datasheet:

   • For more detailed information, always refer to the official datasheet provided by STMicroelectronics.

(For reference only)