Details

---

BUY TMP96C141BFG https://www.utsource.net/itm/p/12533335.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Operating Temperature	TOPR	-40	-	125	°C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	°C	Storage temperature range
Output Current	IOUT	-	50	100	mA	Maximum output current
Quiescent Current	IQ	10	30	50	μA	Quiescent current at VDD = 5V, TA = 25°C
Thermal Resistance	θJA	-	150	-	°C/W	Junction-to-ambient thermal resistance (Typical)
Output Voltage Range	VOUT	0	-	VDD	V	Output voltage range
Response Time	τ	-	10	25	ms	Response time for a step change in temperature
Accuracy	ΔT	-1	0	+1	°C	Temperature accuracy over the operating temperature range
Hysteresis	HYST	-	2	5	°C	Hysteresis for thermal shutdown and reset
Thermal Shutdown	TSD	-	140	160	°C	Thermal shutdown threshold
Thermal Reset	TRST	-	130	150	°C	Thermal reset threshold

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
   • Connect the VDD pin to the positive supply and GND to the ground.

2. Temperature Monitoring:

   • The device operates over a wide temperature range from -40°C to 125°C.
   • For accurate temperature measurements, place the device close to the area of interest.

3. Output Configuration:

   • The output voltage (VOUT) can be configured to provide a signal proportional to the temperature.
   • The output current should not exceed 100mA to avoid damage to the device.

4. Thermal Management:

   • Monitor the thermal resistance (θJA) to ensure proper heat dissipation.
   • If the device reaches the thermal shutdown threshold (TSD), it will automatically shut down to prevent damage. It will reset when the temperature drops below the thermal reset threshold (TRST).

5. Hysteresis:

   • The hysteresis setting helps prevent oscillation around the thermal thresholds.
   • Adjust the hysteresis as needed for your application to ensure stable operation.

6. Storage:

   • Store the device in a temperature-controlled environment between -65°C and 150°C to maintain its performance and reliability.

7. Response Time:

   • The device has a typical response time of 10ms to 25ms for a step change in temperature. This ensures quick and accurate temperature monitoring.

8. Accuracy:

   • The device provides temperature accuracy within ±1°C over the operating temperature range, making it suitable for precise applications.

By following these instructions, you can ensure optimal performance and longevity of the TMP96C141BFG temperature sensor.

(For reference only)