Details

---

BUY EG2113D https://www.utsource.net/itm/p/12533341.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	2.7	-	5.5	V
Output Current	Iout	-	500	-	mA
Quiescent Current	Iq	-	1.5	-	μA
Dropout Voltage	Vdo	-	0.4	-	V
Operating Temp	Toper	-40	-	85	°C
Storage Temp	Tstg	-65	-	150	°C

Instructions for Use:

1. Supply Voltage (Vcc):

   • The EG2113D operates within a supply voltage range of 2.7V to 5.5V. Ensure that the input voltage is within this range to avoid damage to the device.

2. Output Current (Iout):

   • The device can provide up to 500mA of output current. Do not exceed this limit to prevent overheating or failure.

3. Quiescent Current (Iq):

   • The quiescent current is typically 1.5μA. This low current consumption makes the device suitable for battery-powered applications.

4. Dropout Voltage (Vdo):

   • The typical dropout voltage is 0.4V. This means the input voltage should be at least 0.4V higher than the output voltage to ensure proper regulation.

5. Operating Temperature (Toper):

   • The operating temperature range is from -40°C to 85°C. Ensure that the device is used within this temperature range to maintain reliable performance.

6. Storage Temperature (Tstg):

   • The storage temperature range is from -65°C to 150°C. Store the device in a dry and temperature-controlled environment to prevent damage.

7. Mounting and Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components. Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.

8. PCB Layout:

   • Ensure proper PCB layout with adequate heat dissipation if the device will be operating near its maximum output current. Use a ground plane and keep traces short to minimize inductance and improve stability.

9. Capacitors:

   • Use appropriate input and output capacitors as specified in the datasheet to ensure stable operation and filter out noise. Typically, a 1μF ceramic capacitor is recommended for both input and output.

10. Testing:

    • Before finalizing the design, test the device under various operating conditions to ensure it meets the required specifications and performance criteria.

(For reference only)