Details

---

BUY MC33078 https://www.utsource.net/itm/p/12534287.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7	-	44	V
Supply Current	ICC	Quiescent (per op-amp)	-	1.5	-	mA
Input Offset Voltage	VIO	-	-	2.0	10.0	mV
Input Bias Current	IB	-	-	40	120	nA
Input Voltage Range	VI	Common-mode	0	-	VCC - 1.5	V
Output Voltage Swing	VO	No load	0.02	-	VCC - 0.02	V
Slew Rate	SR	-	-	0.5	1.0	V/渭s
Bandwidth	BW	-	-	1.0	3.0	MHz
Output Short-Circuit Protection	-	Continuous	-	-	-	-
Thermal Shutdown	-	-	-	-	-	-

Instructions for Use:

1. Supply Voltage:

   • The MC33078 can operate over a wide range of supply voltages, from 2.7V to 44V. Ensure that the supply voltage is within this range to avoid damage to the device.

2. Supply Current:

   • The quiescent current per op-amp is typically 1.5mA. This value should be considered when designing circuits to ensure proper power budgeting.

3. Input Offset Voltage:

   • The input offset voltage ranges from 2.0mV to 10.0mV. This parameter affects the accuracy of the op-amp and should be minimized in precision applications.

4. Input Bias Current:

   • The input bias current is typically between 40nA and 120nA. This current can affect the operation of high-impedance circuits and should be accounted for in the design.

5. Input Voltage Range:

   • The common-mode input voltage range extends from 0V to V_CC - 1.5V. Inputs should not exceed these limits to prevent damage or incorrect operation.

6. Output Voltage Swing:

   • The output voltage swing is typically from 0.02V to V_CC - 0.02V. This means the output can get very close to the supply rails but not exactly reach them.

7. Slew Rate:

   • The slew rate is typically between 0.5V/渭s and 1.0V/渭s. This parameter determines how quickly the output can change in response to a step input.

8. Bandwidth:

   • The bandwidth of the op-amp is typically between 1.0MHz and 3.0MHz. This parameter affects the frequency response of the circuit.

9. Output Short-Circuit Protection:

   • The MC33078 has built-in output short-circuit protection, which helps prevent damage in case of an output short.

10. Thermal Shutdown:

    • The device includes thermal shutdown protection to prevent overheating and potential damage. If the device exceeds its safe operating temperature, it will automatically shut down until it cools down.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• Proper decoupling capacitors should be used near the power supply pins to ensure stable operation.
• The MC33078 is suitable for a wide range of applications, including signal conditioning, filtering, and amplification.

(For reference only)