Details

---

BUY AMP02FPZ https://www.utsource.net/itm/p/12534313.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Offset Voltage	Vos	T_A = +25掳C	-0.6	0	+0.6	mV
Input Bias Current	Ib	T_A = +25掳C, V_I = 卤10V	-10	0	+10	nA
Input Voltage Range	Vcm		-Vs		+Vs	V
Output Voltage Swing	Vo(swing)	R_L = 10k惟, T_A = +25掳C	-Vs+1.5		+Vs-1.5	V
Supply Voltage	Vs		卤2.5		卤18	V
Bandwidth	BW	G = +1, V_O = 2VP-P		1.2		MHz
Slew Rate	SR			0.3		V/渭s
Quiescent Current	IQ	T_A = +25掳C		1.5		mA

Instructions for Use:

1. Power Supply:

   • The AMP02FPZ can operate with a supply voltage range from 卤2.5V to 卤18V. Ensure the power supply is stable and within these limits to avoid damage.

2. Input Signals:

   • The input voltage range should not exceed the supply voltages. For optimal performance, keep the common-mode input voltage within the specified range.

3. Output Load:

   • Connect a load resistor (e.g., 10k惟) to ensure the output voltage swing remains within the operational limits of -Vs + 1.5V to +Vs - 1.5V.

4. Temperature Considerations:

   • Parameters like input offset voltage and bias current are specified at +25掳C. Ensure the operating temperature is controlled or account for variations outside this temperature.

5. Bandwidth and Slew Rate:

   • For applications requiring high-speed signal processing, note the bandwidth and slew rate limitations. The typical bandwidth is 1.2 MHz with a gain of +1, and the slew rate is 0.3 V/渭s.

6. Quiescent Current:

   • Monitor the quiescent current, which is typically 1.5 mA, to manage power consumption in low-power designs.

7. Handling Precautions:

   • Handle the AMP02FPZ with care to avoid electrostatic discharge (ESD), which can damage sensitive components. Use appropriate ESD protection measures during handling and installation.

(For reference only)