Details

---

BUY S29GL128N11TFI020 https://www.utsource.net/itm/p/12534384.html

Parameter	Description	Value	Unit
Device	Device Name	S29GL128N11TFI020	-
Package	Package Type	TFI (Thin Fine Pitch Ball Grid Array)	-
Pins	Number of Pins	48	-
Memory Size	Total Memory Capacity	128 Mbit	-
Organization	Memory Organization	16M x 8	-
Vcc Range	Supply Voltage Range	2.7 to 3.6	V
Operating Temperature	Operating Temperature Range	-40 to +85	°C
Data Retention	Data Retention Time	20	Years
Write Cycle	Write Cycle Time	5	ms
Read Cycle	Read Cycle Time	70	ns
Erase Cycle	Block Erase Time	200	ms
Endurance	Endurance Cycles	100,000	-
Programming Voltage	Programming Voltage	Vpp = Vcc	V
Access Time	Access Time	70	ns
Standby Current	Standby Current (Vcc = 3.0V)	1.0	μA
Active Current	Active Current (Vcc = 3.0V)	30	mA
Write Protect	Write Protect Pin	WP#	-
Hold Function	Hold Function Pin	HOLD#	-
Package Marking	Package Marking	S29GL128N11TFI020	-

Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage (Vcc) is within the specified range of 2.7V to 3.6V.
   • Connect the Vcc pin to the power supply and the GND pin to ground.

2. Programming:

   • The device is programmed using standard SPI (Serial Peripheral Interface) commands.
   • The programming voltage (Vpp) is the same as the supply voltage (Vcc).

3. Read Operations:

   • To read data, use the appropriate SPI read command.
   • The access time is 70ns, so ensure that your system can handle this speed.

4. Write Operations:

   • Before writing data, the block must be erased.
   • The write cycle time is 5ms, and the block erase time is 200ms.
   • Use the write enable (WREN) command before any write or erase operation.

5. Protect and Hold Functions:

   • The WP# (Write Protect) pin can be used to prevent accidental writes.
   • The HOLD# pin can be used to pause ongoing operations.

6. Temperature Considerations:

   • Ensure that the operating temperature is within the range of -40°C to +85°C.

7. Current Consumption:

   • The standby current is 1.0μA at 3.0V, and the active current is 30mA at 3.0V.

8. Data Retention:

   • The device retains data for up to 20 years under normal operating conditions.

9. Endurance:

   • The device is rated for 100,000 endurance cycles, meaning it can be written to and erased 100,000 times.

10. Package Handling:

    • Handle the device with care to avoid damage to the pins and the package.
    • Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)