Details

---

BUY UPD6345 https://www.utsource.net/itm/p/12534664.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VCC	4.75	5	5.25	V	Operating voltage range
Standby Current	ICCS	-	0.1	0.5	mA	Current consumption in standby mode
Operating Current	ICCO	10	20	30	mA	Current consumption during operation
Output Voltage	VOUT	0	5	5.25	V	Voltage at output pin
Output Current	IOUT	0	10	20	mA	Maximum continuous output current
Power Dissipation	PD	-	100	150	mW	Maximum power dissipation
Operating Temperature	TOPR	-40	25	85	°C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	°C	Storage temperature range
Thermal Resistance (θJA)	θJA	-	150	-	°C/W	Thermal resistance from junction to ambient

Instructions for Use

1. Power Supply Connection:

   • Connect the VCC pin to a stable 5V supply.
   • Ensure the supply voltage is within the specified range (4.75V to 5.25V).

2. Ground Connection:

   • Connect the GND pin to the system ground.

3. Output Configuration:

   • Connect the load to the VOUT pin.
   • Ensure the load does not exceed the maximum output current (20mA).

4. Standby Mode:

   • To enter standby mode, set the appropriate control pin (if available) to the required state.
   • Monitor the ICCS to ensure it remains within the specified range (0.1mA to 0.5mA).

5. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum power dissipation (150mW).
   • Consider using a heatsink or thermal pad if necessary.

6. Temperature Range:

   • Operate the device within the specified temperature range (-40°C to 85°C).
   • Store the device within the storage temperature range (-65°C to 150°C).

7. Handling Precautions:

   • Handle the device with care to avoid damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage to the device.

8. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Monitor the device parameters during operation to ensure they remain within the specified limits.

(For reference only)