Details

---

BUY RTL8111H-CG https://www.utsource.net/itm/p/12534669.html

Parameter	Description	Value	Unit
Device Type	High-performance single-chip 10/100/1000 Mbps Ethernet Controller with PCI Express Interface	-	-
Interface	PCI Express (PCIe) x1	-	-
Data Rate	Supported Data Rates	10/100/1000 Mbps	-
Operating Voltage	Core Supply Voltage	1.2V ± 5%	V
Operating Voltage	I/O Supply Voltage	3.3V ± 5%	V
Operating Temperature	Commercial Grade	0°C to 70°C	°C
Operating Temperature	Industrial Grade	-40°C to 85°C	°C
Package	Package Type	QFN-64	-
Pin Count	Number of Pins	64	-
Wake-on-LAN	Wake-on-LAN Support	Yes	-
Power Consumption	Active Mode	< 200 mW	W
Power Consumption	Low Power Mode	< 100 μW	W
Compliance	RoHS Compliance	Yes	-
Compliance	WEEE Compliance	Yes	-
Compliance	REACH Compliance	Yes	-

Instructions for Use:

1. Power Supply:

   • Ensure that the core supply voltage is set to 1.2V ± 5%.
   • Ensure that the I/O supply voltage is set to 3.3V ± 5%.

2. Temperature Range:

   • For commercial applications, operate the device within the temperature range of 0°C to 70°C.
   • For industrial applications, operate the device within the temperature range of -40°C to 85°C.

3. Installation:

   • Mount the RTL8111H-CG on a PCB using the QFN-64 package.
   • Ensure proper thermal management to maintain operating temperatures within the specified range.

4. Configuration:

   • Configure the device using the PCI Express interface.
   • Set up the network parameters (IP address, subnet mask, etc.) as required.

5. Wake-on-LAN:

   • Enable Wake-on-LAN in the system BIOS/UEFI settings.
   • Configure the system to wake up from sleep or hibernation states when a magic packet is received.

6. Power Management:

   • Utilize the low power mode to reduce power consumption when the device is not in active use.
   • Ensure that the power consumption does not exceed 200 mW in active mode and 100 μW in low power mode.

7. Compliance:

   • Verify that the device meets all relevant compliance standards (RoHS, WEEE, REACH).

8. Testing:

   • Test the device for proper operation by connecting it to a network and verifying data transmission at 10/100/1000 Mbps speeds.
   • Use diagnostic tools to check for any errors or issues.

9. Troubleshooting:

   • If the device does not function correctly, check the power supply, temperature, and configuration settings.
   • Refer to the datasheet and application notes for detailed troubleshooting steps.

10. Storage:

    • Store the device in a dry, cool place to prevent damage.
    • Handle the device with care to avoid static discharge and physical damage.

(For reference only)