Details

---

BUY LM35DZ https://www.utsource.net/itm/p/12534689.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Continuous Operation	4	-	30	V
Output Voltage	VO	-10掳C to +150掳C	0.230	-	4.970	V
Quiescent Current	Iq	+25掳C	-	60	-	渭A
Temperature Sensitivity	ST	+25掳C	-	10	-	mV/掳C
Temperature Range	TA	-	-55	-	150	掳C
Output Impedance	Zo	25掳C	-	0.1	-	惟
Thermal Resistance	R胃JA	TO-92 Package	-	200	-	掳C/W

Instructions for Using the LM35DZ:

1. Supply Voltage:

   • The LM35DZ can operate with a supply voltage ranging from 4V to 30V. Ensure the supply voltage is within this range to avoid damage to the device.

2. Output Voltage:

   • The output voltage of the LM35DZ is directly proportional to the temperature in Celsius. The typical output is 10mV/掳C. For example, at 25掳C, the output voltage will be 250mV.

3. Quiescent Current:

   • The quiescent current is typically 60渭A at 25掳C. This low current draw makes the LM35DZ suitable for battery-powered applications.

4. Temperature Sensitivity:

   • The temperature sensitivity is 10mV/掳C. This means that for every degree Celsius increase in temperature, the output voltage increases by 10mV.

5. Temperature Range:

   • The LM35DZ is designed to operate over a wide temperature range from -55掳C to +150掳C. It is suitable for both industrial and consumer applications.

6. Output Impedance:

   • The output impedance is very low, typically 0.1惟 at 25掳C. This ensures that the output voltage remains stable even when connected to a load.

7. Thermal Resistance:

   • The thermal resistance (R_胃JA) of the TO-92 package is 200掳C/W. This value is important for heat dissipation considerations, especially in high-temperature environments.

8. Circuit Connection:

   • Connect the positive terminal of the power supply to the V_CC pin, the negative terminal to the GND pin, and the output pin to your measurement circuit.
   • A bypass capacitor (e.g., 0.1渭F) between V_CC and GND is recommended to filter out any noise and ensure stable operation.

9. Handling Precautions:

   • Handle the LM35DZ with care to avoid static discharge, which can damage the device.
   • Ensure proper heat sinking if the device is used in high-temperature environments or under high power conditions.

By following these guidelines, you can effectively use the LM35DZ temperature sensor in your projects.

(For reference only)