Details

---

BUY 2SC2878 https://www.utsource.net/itm/p/12534694.html

Below is the parameter table and instructions for the 2SC2878 transistor:

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	60	V
Collector-Base Voltage	VCBO	-	-	70	V
Emitter-Base Voltage	VEBO	-	-	6	V
Collector Current	IC	-	-	1500	mA
Base Current	IB	-	-	150	mA
Power Dissipation	PT	-	-	625	mW
Operating Temperature Range	TOP	-55	-	150	°C
Storage Temperature Range	TSTG	-65	-	150	°C
Forward Current Transfer Ratio (hFE)	hFE	20	100	300	-
Transition Frequency	fT	-	100	-	MHz

Instructions

1. Handling and Storage:

   • Store the 2SC2878 in a dry, cool place to prevent moisture damage.
   • Handle the transistor with care to avoid mechanical stress and static electricity.

2. Mounting:

   • Ensure proper heat sinking if the transistor will be operating near its maximum power dissipation.
   • Use appropriate mounting hardware and thermal paste to ensure good thermal conductivity.

3. Biasing:

   • Ensure that the base current (I_B) is sufficient to drive the collector current (I_C) within the specified range.
   • Use a suitable biasing network to maintain stable operation over temperature variations.

4. Protection:

   • Include appropriate protection circuits such as flyback diodes for inductive loads to prevent voltage spikes.
   • Use capacitors to filter out high-frequency noise if necessary.

5. Operating Conditions:

   • Do not exceed the maximum ratings for voltage, current, and power dissipation.
   • Operate the transistor within the specified temperature range to ensure reliable performance.

6. Testing:

   • Use a multimeter or a transistor tester to verify the functionality of the 2SC2878 before installation.
   • Test the circuit under load conditions to ensure it operates as expected.

By following these guidelines, you can ensure optimal performance and longevity of the 2SC2878 transistor in your applications.

(For reference only)