Details

---

BUY XC9572-15TQ100C https://www.utsource.net/itm/p/12534735.html

Parameter	Description	Value
Device Type	High-Density, Low-Cost CPLD	XC9572
Package	TQFP (Thin Quad Flat Package)	100-Pin
Speed Grade	Propagation Delay Time	-15 ns (typical)
Operating Voltage (Vcc)	Supply Voltage Range	3.3V ± 10%
I/O Voltage (Vcco)	I/O Supply Voltage Range	3.3V ± 10%
Temperature Range	Operating Temperature	0°C to 70°C (Commercial)
Configuration Memory	Non-Volatile Configuration Memory	160 kbits
Logic Cells	Number of Logic Cells	72
Macrocells	Number of Macrocells	72
Flip-Flops	Number of Flip-Flops	144
Look-Up Tables (LUTs)	Number of LUTs	72
Input Pins	Number of Input Pins	84
Output Pins	Number of Output Pins	84
I/O Pins	Total Number of I/O Pins	84
Internal RAM	Embedded RAM Size	1.5 kbits
Max. Frequency	Maximum Clock Frequency	200 MHz (typical)
Power Consumption	Typical Power Consumption	100 mW (typical)
Programming Method	In-System Programming (ISP)	JTAG, Boundary Scan
Configuration Modes	Configuration Modes	Master Serial, Slave Serial, Master Parallel, Slave Parallel
Package Body Size	Package Dimensions	14 mm x 14 mm x 1.4 mm
Lead Pitch	Lead Pitch	0.5 mm

Instructions for Use:

1. Power Supply:

   • Ensure that the Vcc and Vcco pins are connected to a stable 3.3V supply.
   • Use appropriate decoupling capacitors (e.g., 0.1 μF and 10 μF) close to the power pins to reduce noise.

2. Configuration:

   • The device supports in-system programming (ISP) via JTAG or boundary scan.
   • For initial configuration, use a programming tool compatible with the Xilinx JTAG interface.
   • Follow the Xilinx programming guidelines for the XC9572 device.

3. I/O Handling:

   • Configure the I/O pins as inputs or outputs based on your design requirements.
   • Use the appropriate pull-up or pull-down resistors if needed.
   • Ensure that the I/O voltage (Vcco) is within the specified range.

4. Clocking:

   • Connect the clock signal to the appropriate input pin.
   • Ensure that the clock signal meets the maximum frequency specifications to avoid timing violations.

5. Thermal Management:

   • The device operates within a commercial temperature range of 0°C to 70°C.
   • Ensure adequate cooling if operating in high-temperature environments.

6. Handling Precautions:

   • Handle the device with care to avoid static discharge.
   • Use anti-static wrist straps and mats when handling the device.
   • Store the device in anti-static packaging when not in use.

7. Testing:

   • After programming, perform functional tests to ensure the device operates correctly.
   • Use boundary scan testing to verify the integrity of the device and its connections.

For detailed information, refer to the Xilinx XC9572 data sheet and application notes.

(For reference only)