Details

---

BUY TLV5628CDW https://www.utsource.net/itm/p/12534744.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating Range	2.7	-	5.5	V
Output Voltage Range	VOH, VOL	VDD = 5V, RL = 10kΩ	0.0	-	5.0	V
Reference Voltage	VREF	Typical	-	1.22	-	V
Digital Input Voltage	VIH, VIL	Valid Logic High/Low	0.8	-	2.0	V
Power Consumption	IDD	All channels off	-	30	-	μA
Settling Time	tSETTLE	0.1% error, full-scale step	-	4	-	μs
Differential Nonlinearity	DNL	Full Scale Range	-	±1	-	LSB
Integral Nonlinearity	INL	Full Scale Range	-	±2	-	LSB

Instructions for TLV5628CDW

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the operating range of 2.7V to 5.5V.

2. Reference Voltage Setup:

   • The internal reference voltage is typically 1.22V. This can be used directly or an external reference can be applied if a different reference voltage is required.

3. Digital Inputs:

   • Use digital input voltages that meet the valid logic high and low levels (VIH ≥ 2.0V, VIL ≤ 0.8V).

4. Output Configuration:

   • The output voltage range will vary based on the supply voltage but can go from near 0V to near VDD. Ensure the load resistance is appropriate to avoid excessive power dissipation.

5. Settling Time Consideration:

   • For accurate conversion, account for a settling time of approximately 4μs when transitioning between steps.

6. Linearity:

   • Monitor differential nonlinearity (DNL) and integral nonlinearity (INL) for accuracy in applications requiring precise analog outputs.

7. Power Consumption:

   • Keep in mind the typical power consumption is around 30μA with all channels off, which helps in designing low-power systems.

8. Handling and Storage:

   • Follow standard handling procedures for electrostatic sensitive devices (ESD). Store in recommended conditions to prevent damage.

Note: Always refer to the official datasheet provided by the manufacturer for detailed specifications and application notes.

(For reference only)