Details

---

BUY PD69108FILQ-TR https://www.utsource.net/itm/p/12534801.html

Parameter	Description	Value	Unit
Device Name	High Voltage Power MOSFET	PD69108FILQ-TR
Package Type	PowerTrench?	LFPAK56 (DDPAK)
Lead Finish	Matte Tin
Mounting Type	Surface Mount
Operating Temperature	Junction Temperature Range	-55 to +175	°C
Continuous Drain Current	Continuous Drain Current	80	A
Pulse Drain Current	Pulse Drain Current (t=10μs, Duty=1%)	280	A
Gate Charge	Total Gate Charge at VGS = 10V	46.3	nC
Input Capacitance	Input Capacitance at VDS = 0V	2080	pF
Output Capacitance	Output Capacitance at VDS = 10V	45	pF
Reverse Transfer Capacitance	Reverse Transfer Capacitance at VDS = 10V	15	pF
On-State Resistance	On-State Resistance at VGS = 10V	6.5	mΩ
Gate Threshold Voltage	Gate Threshold Voltage	2.5 to 4.5	V
Maximum Drain Source Voltage	Maximum Drain Source Voltage	80	V

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid damage to the leads and package.
   • Avoid exposure to high temperatures and corrosive environments.

2. Soldering Instructions:

   • Recommended soldering temperature: 260°C for 10 seconds.
   • Ensure proper cooling after soldering to prevent thermal shock.

3. Storage Conditions:

   • Store in a dry environment with controlled humidity.
   • Follow moisture sensitivity level guidelines provided by the manufacturer.

4. Mounting Orientation:

   • Ensure correct orientation during mounting to match the circuit board layout.
   • Verify polarity and pin alignment before soldering.

5. Electrical Testing:

   • Perform initial testing under controlled conditions.
   • Monitor temperature and electrical parameters during operation to ensure they remain within specified limits.

6. Application Notes:

   • Refer to the datasheet for detailed application circuits and design considerations.
   • Consider using heat sinks or other cooling methods if operating near maximum temperature limits.

(For reference only)