Details

---

BUY BCM5461SA1KPFG-P11 https://www.utsource.net/itm/p/12534815.html

Parameter	Description	Value
Part Number	Full Part Number	BCM5461SA1KPFG-P11
Package Type	Package Style	24-Pin QFN
Operating Temperature	Operating Temperature Range	-40°C to +85°C
Supply Voltage (VCC)	Supply Voltage Range	3.15V to 3.45V
Data Rate	Maximum Data Rate	10/100/1000 Mbps
Interface	Interface Type	MII, RMII, RGMII
Power Consumption	Typical Power Consumption	350 mW
Pin Count	Number of Pins	24
Dimensions	Package Dimensions (L x W x H)	5 mm x 5 mm x 0.85 mm
Lead-Free	RoHS Compliance	Yes
Mounting Type	Mounting Style	Surface Mount

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 3.15V to 3.45V.
   • Use appropriate decoupling capacitors (0.1 μF and 10 μF) close to the power pins to reduce noise and improve stability.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
   • Provide adequate heat dissipation if operating at higher temperatures or under high load conditions.

3. Signal Integrity:

   • Use controlled impedance traces for signal lines, especially for high-speed interfaces like RGMII.
   • Terminate differential pairs with the appropriate termination resistors (typically 50 Ohms).

4. Reset and Initialization:

   • Apply a reset pulse to the RESET pin during power-up or system initialization.
   • Follow the initialization sequence as outlined in the datasheet to configure the device properly.

5. Firmware and Configuration:

   • Use the provided firmware or configuration tools to set up the device according to your network requirements.
   • Refer to the datasheet for specific register settings and configuration options.

6. ESD Protection:

   • Handle the device with care to avoid electrostatic discharge (ESD).
   • Use ESD-protected workstations and grounding straps when handling the device.

7. Storage and Handling:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Follow recommended storage and handling guidelines to maintain the integrity of the device.

For detailed specifications and additional information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)