Details

---

BUY SEMIX341D16S https://www.utsource.net/itm/p/12534820.html

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Rated Voltage	VDRM	-	1600	-	V	Blocking voltage in reverse direction
Rated Current	ITSM	-	1600	-	A	Non-repetitive peak on-state current
On-State Voltage	VTM	-	2.5	-	V	At ITSM = 1600 A, Tj = 25°C
Gate Threshold Voltage	VGT	12	15	18	V	Gate-to-emitter threshold voltage
Turn-On Time	ton	-	1.5	-	μs	At IC = 1600 A, VGE = 15 V
Turn-Off Time	toff	-	2.5	-	μs	At IC = 1600 A, VGE = -15 V
Junction Temperature	Tj	-40	-	150	°C	Operating junction temperature range
Storage Temperature	Tstg	-40	-	150	°C	Storage temperature range
Case Temperature	Tc	-40	-	100	°C	Maximum case temperature

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper mounting to a heat sink to manage thermal dissipation.
   • Handle the device with care to avoid mechanical stress or damage.

2. Electrical Connections:

   • Connect the gate terminal (G) to the control circuit.
   • Connect the emitter terminal (E) to the common ground.
   • Connect the collector terminal (C) to the load or power supply.

3. Gate Drive:

   • Apply a gate voltage (V_GE) of at least 15 V to turn on the device.
   • Apply a negative gate voltage (V_GE) of at least -15 V to turn off the device.
   • Ensure the gate drive circuit can provide sufficient current to charge and discharge the gate capacitance.

4. Thermal Management:

   • Monitor the junction temperature (T_j) to ensure it stays within the operating range.
   • Use appropriate cooling methods such as forced air or liquid cooling if necessary.

5. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage from excessive current.
   • Consider using a current-limiting resistor or a fast-acting fuse.

6. Storage and Environment:

   • Store the device in a dry, cool place within the specified storage temperature range.
   • Avoid exposure to corrosive environments or high humidity.

7. Testing:

   • Perform initial testing under controlled conditions to verify correct operation.
   • Regularly inspect the device for signs of wear or damage.

8. Safety Precautions:

   • Follow all safety guidelines when handling high-voltage and high-current circuits.
   • Use appropriate personal protective equipment (PPE) when necessary.

(For reference only)