Details

---

BUY HD74LS92P https://www.utsource.net/itm/p/12534828.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.75	-	5.25	V
Input High Voltage	VIH	II = -0.1 mA	2.0	-	VCC	V
Input Low Voltage	VIL	II = 0.4 mA	0	-	0.8	V
Output High Voltage	VOH	IO = -0.4 mA	2.4	-	VCC-0.5	V
Output Low Voltage	VOL	IO = 16 mA	0	-	0.5	V
Propagation Delay Time	tpd	VCC = 5V, f = 10 MHz	15	22	35	ns
Power Dissipation	PD	Continuous	-	-	100	mW
Operating Temperature	TA	Storage	-55	-	125	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Apply input signals (V_IH, V_IL) within the specified voltage ranges to avoid damage or incorrect operation.
   • Ensure input signals have appropriate rise and fall times to meet the propagation delay requirements.

3. Output Signals:

   • The output high (V_OH) and low (V_OL) voltages should be within the specified limits to ensure proper interfacing with other logic devices.
   • Use appropriate current limiting resistors if driving loads directly from the outputs.

4. Timing Considerations:

   • The propagation delay time (t_pd) should be considered when designing timing-critical circuits.
   • Ensure that the clock frequency does not exceed the maximum operating frequency to avoid timing issues.

5. Thermal Management:

   • The power dissipation (P_D) should not exceed 100 mW to prevent overheating.
   • If operating at high temperatures, consider using heat sinks or providing adequate ventilation.

6. Environmental Conditions:

   • Store and operate the device within the temperature range of -55掳C to 125掳C to ensure reliable performance.
   • Avoid exposing the device to excessive humidity or corrosive environments.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuitry.
   • Use anti-static wrist straps and mats when handling the device.

8. Testing:

   • Before integrating the HD74LS92P into a larger system, test it individually to verify its functionality.
   • Use a multimeter to check for short circuits and open circuits on the pins.

By following these guidelines, you can ensure the proper operation and longevity of the HD74LS92P.

(For reference only)