Details

---

BUY CD4518BCN https://www.utsource.net/itm/p/12534990.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	-	3	-	15	V
Input Voltage (High)	VIH	II = -0.1 mA	2	-	VDD - 0.5	V
Input Voltage (Low)	VIL	II = 0.1 mA	0	-	VDD * 0.3	V
Output Voltage (High)	VOH	IO = -0.1 mA	VDD - 0.5	-	VDD	V
Output Voltage (Low)	VOL	IO = 0.1 mA	0	-	0.5	V
Propagation Delay Time	tpd	VDD = 5V, fCLK = 1 MHz	100	150	200	ns
Power Dissipation	PD	-	-	-	100	mW
Operating Temperature Range	TA	-	-40	-	85	°C
Storage Temperature Range	TSTG	-	-65	-	150	°C

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the range of 3V to 15V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • The input high voltage (V_IH) should be at least 2V and can go up to V_DD - 0.5V.
   • The input low voltage (V_IL) should be between 0V and 0.3 * V_DD.

3. Output Signals:

   • The output high voltage (V_OH) will be between V_DD - 0.5V and V_DD.
   • The output low voltage (V_OL) will be between 0V and 0.5V.

4. Timing:

   • The propagation delay time (t_pd) is typically 150ns at V_DD = 5V and f_CLK = 1 MHz, with a minimum of 100ns and a maximum of 200ns.

5. Power Dissipation:

   • The maximum power dissipation (P_D) is 100mW. Ensure proper heat dissipation if operating near this limit.

6. Temperature:

   • The device operates reliably over a temperature range from -40°C to 85°C.
   • Store the device in a temperature range from -65°C to 150°C.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

8. Mounting:

   • Ensure proper soldering and mounting to maintain electrical and mechanical integrity.
   • Avoid excessive mechanical stress on the pins and package.

(For reference only)