Details

---

BUY INA126PA https://www.utsource.net/itm/p/12535086.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Continuous Operation	2.7	-	36	V
Input Voltage Range	VIN	Referenced to Ground	0	-	VCC - 1.5	V
Output Voltage Range	VOUT	Referenced to Ground	0	-	VCC - 1.5	V
Quiescent Current	IQ	VCC = 36V	-	800	-	渭A
Input Bias Current	IB	VCC = 36V	-	50	-	nA
Input Offset Voltage	VOS	VCC = 36V	-	200	-	渭V
Common-Mode Rejection Ratio	CMRR	VCC = 36V	-	110	-	dB
Power-Supply Rejection Ratio	PSRR	VCC = 36V	-	100	-	dB
Gain	AV	VCC = 36V	-	5000	-	V/V
Bandwidth	fBW	VCC = 36V, G = 1000	-	10	-	kHz
Slew Rate	SR	VCC = 36V	-	0.4	-	V/渭s

Instructions for Using the INA126PA:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.7V to 36V.
   • Connect the positive supply to V_CC and the negative supply to ground.

2. Input Connection:

   • Connect the input signals to the non-inverting (IN+) and inverting (IN-) inputs.
   • Ensure the input voltage range is between 0V and V_CC - 1.5V.

3. Output Configuration:

   • The output voltage (V_OUT) will be referenced to ground and should not exceed V_CC - 1.5V.
   • Connect the output to the load or next stage of your circuit.

4. Biasing and Offset:

   • The input bias current is typically 50nA, so ensure that the input sources can handle this current.
   • The input offset voltage is typically 200渭V, which may need to be considered in precision applications.

5. Gain Setting:

   • The INA126PA has a fixed gain of 5000 V/V. No external resistors are required to set the gain.

6. Common-Mode Rejection:

   • The INA126PA has a high common-mode rejection ratio (CMRR) of 110 dB, making it suitable for differential signal amplification.

7. Power-Supply Rejection:

   • The power-supply rejection ratio (PSRR) is 100 dB, ensuring minimal noise from the power supply affects the output.

8. Bandwidth and Slew Rate:

   • The bandwidth is 10 kHz at a gain of 1000, and the slew rate is 0.4 V/渭s. These parameters should be considered when designing the circuit to avoid distortion.

9. Thermal Considerations:

   • Ensure proper heat dissipation if operating at higher supply voltages or in high ambient temperatures.

10. Storage and Handling:

    • Store the INA126PA in a dry environment and handle with care to avoid damage from static electricity.

(For reference only)