Details

---

BUY IRS2092STRPBF ORIGINAL GOODS IN STOCK https://www.utsource.net/itm/p/12535115.html

Parameter	Description
Part Number	IRS2092STRPBF
Description	Half-Bridge Driver with Bootstrap Capacitor, SO-8
Manufacturer	Infineon Technologies
Package Type	SO-8
Operating Voltage	VDD = 10V to 60V
Input Voltage	VIN = 3.3V to 15V
Output Current	IOUT = ±4A (Peak)
Operating Temperature	-40°C to +150°C (junction temperature)
Supply Current	ICC = 2mA (typical)
Propagation Delay	tpd = 60ns (max)
Under-Voltage Lockout	UVLO active at VUVLO = 9.5V (typical)
Features	High and low-side drivers, integrated bootstrap diode, thermal shutdown

Instructions for Use:

1. Power Supply Connection: Connect the power supply voltage (VDD) within the specified range of 10V to 60V.
2. Input Signal: Apply input signals (VIN) between 3.3V and 15V to control the high and low-side MOSFETs.
3. Bootstrap Capacitor: Ensure a properly sized bootstrap capacitor is connected between the bootstrap pin and the source of the high-side MOSFET for proper operation.
4. Thermal Management: Monitor the junction temperature to ensure it stays within the operational range of -40°C to +150°C.
5. Under-Voltage Lockout (UVLO): The device will not operate if the supply voltage falls below the UVLO threshold (typically 9.5V). Ensure adequate supply voltage to avoid unintended shutdowns.
6. Layout Considerations: Keep high-current paths short and direct to minimize inductance and improve efficiency. Place decoupling capacitors close to the power pins.

Storage and Handling:

• Store in a dry environment to prevent moisture damage.
• Handle with care to avoid static damage; use appropriate ESD precautions.

(For reference only)