Details
BUY SC1145DG https://www.utsource.net/itm/p/12535118.html
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | Vcc | Operating | 2.7 | 5.0 | 5.5 | V |
| Quiescent Current | Iq | Vcc = 5V | - | 20 | - | μA |
| Output Current | Iout | Vcc = 5V, Vo = 3.3V | 0 | 100 | 150 | mA |
| Output Voltage | Vo | Vcc = 5V, Iout = 100mA | 3.1 | 3.3 | 3.5 | V |
| Dropout Voltage | Vdo | Iout = 150mA | 0.2 | 0.3 | 0.5 | V |
| Thermal Shutdown | TSD | - | - | 160 | - | °C |
| Operating Temperature | Topr | - | -40 | - | 85 | °C |
| Storage Temperature | Tstg | - | -65 | - | 150 | °C |
Instructions for Use:
Power Supply Connection:
- Connect the supply voltage (Vcc) to the input pin.
- Ensure the supply voltage is within the operating range of 2.7V to 5.5V.
Output Configuration:
- Connect the load to the output pin (Vo).
- The output voltage is typically 3.3V when the supply voltage is 5V and the load current is within the specified range.
Thermal Considerations:
- Place the device in a well-ventilated area to avoid overheating.
- If the device temperature exceeds 160°C, it will automatically shut down to prevent damage.
Current Limiting:
- The device can provide up to 150mA of output current.
- For currents exceeding 100mA, ensure the dropout voltage is within the specified range to maintain stable output.
Operating and Storage Temperature:
- The device is designed to operate between -40°C and 85°C.
- Store the device between -65°C and 150°C to ensure long-term reliability.
Capacitor Recommendations:
- Use a 1μF ceramic capacitor at the input and a 1μF ceramic capacitor at the output for stability.
- Place these capacitors as close as possible to the respective pins to minimize parasitic inductance.
Handling Precautions:
- Handle the device with care to avoid static discharge.
- Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.
Mounting:
- Solder the device to the PCB using a reflow soldering process or hand soldering with a temperature-controlled iron.
- Ensure the soldering temperature does not exceed the maximum storage temperature of 150°C.
View more about SC1145DG on main site
