Details

---

BUY IXFH52N50P https://www.utsource.net/itm/p/12535147.html

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Drain-Source Voltage	VDS		-	500	-	V
Gate-Source Voltage	VGS		-15	0	20	V
Continuous Drain Current	ID	TC = 25°C	-	52	-	A
Pulse Drain Current	ID( pul )	tp = 10 μs, TC = 25°C	-	160	-	A
Gate Charge	QG	VGS = 15V, ID = 52A	-	33	-	nC
Input Capacitance	Ciss	VDS = 400V, f = 1 MHz	-	1750	-	pF
Output Capacitance	Coss	VDS = 400V, f = 1 MHz	-	320	-	pF
Reverse Transfer Capacitance	Crss	VDS = 400V, f = 1 MHz	-	430	-	pF
Total Power Dissipation	PTOT	TC = 25°C	-	1200	-	W
Junction Temperature	TJ	Operating Range	-55	-	150	°C
Storage Temperature	TSTG		-55	-	150	°C

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical damage.
   • Use appropriate heat sinks to manage thermal dissipation, especially during high current operations.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Ensure that the gate-source voltage (V_GS) does not exceed the maximum rating of ±20V to prevent gate damage.

3. Thermal Management:

   • The device should be mounted on a suitable heatsink to keep the junction temperature within the specified range (-55°C to 150°C).
   • Monitor the temperature of the heatsink and the ambient environment to ensure proper cooling.

4. Operation:

   • Operate the device within the specified continuous drain current (I_D) and pulse drain current (I_D(pul)) limits.
   • Ensure that the drain-source voltage (V_DS) does not exceed 500V to avoid breakdown.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and corrosive environments.
   • Keep the device in its original packaging until ready for use to protect against static discharge.

6. Testing:

   • Perform initial testing at low power levels to verify correct operation before applying full load conditions.
   • Use appropriate test equipment and follow safety guidelines to avoid electrical hazards.

7. Safety:

   • Always follow proper electrical safety procedures when handling and testing the device.
   • Use personal protective equipment (PPE) as necessary, especially when working with high voltages and currents.

(For reference only)