Details

---

BUY P3596L-AD-TA5-T https://www.utsource.net/itm/p/12535151.html

Parameter	Value
Part Number	P3596L-AD-TA5-T
Type	MOSFET
Package	TO-220
Polarity	N-Channel
VDSS (Max)	60V
RDS(on)	4.5 mΩ (at VGS = 10V)
ID (Max)	78A (Pulsed), 42A (Continuous)
VGS(th)	2V to 4V
Power Dissipation	125W (TC = 25°C)
Operating Temperature	-55°C to +150°C
Storage Temperature	-65°C to +175°C
Gate Charge	115 nC
Input Capacitance	2150 pF (at VDS = 0V)
Output Capacitance	350 pF (at VDS = 0V)
Reverse Transfer Capacitance	100 pF (at VDS = 0V)
Thermal Resistance (Junction to Case)	0.5°C/W
Thermal Resistance (Junction to Ambient)	62.5°C/W

Instructions:

1. Handling and Storage:

   • Store in a dry, cool place.
   • Handle with care to avoid damage to the leads and package.
   • Use ESD protection when handling to prevent damage from static electricity.

2. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the operating range.
   • Use thermal compound between the device and the heatsink for better thermal conductivity.

3. Soldering:

   • Preheat the PCB to 100°C to 150°C before soldering.
   • Soldering temperature should not exceed 260°C.
   • Soldering time should be kept to a minimum (less than 10 seconds).

4. Electrical Connections:

   • Connect the source, drain, and gate terminals as per the circuit diagram.
   • Ensure the gate is properly biased to control the MOSFET operation.
   • Use appropriate gate drive circuits to ensure fast switching and minimize switching losses.

5. Testing:

   • Test the device under controlled conditions to verify its performance.
   • Measure V_DS, I_D, and R_DS(on) to ensure the device meets the specified parameters.

6. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use protective equipment such as gloves and safety glasses when handling the device.

7. Disposal:

   • Dispose of the device in accordance with local environmental regulations.

(For reference only)