Details

---

BUY MC33060AD https://www.utsource.net/itm/p/12535170.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating	2.7	-	40	V
Output Voltage	VOUT	Dropout	-	1.3	-	V
Quiescent Current	IQ	VIN = 5V, IOUT=0	-	60	-	μA
Load Regulation		IOUT=1mA to 1A	-	0.2	-	%
Line Regulation		VIN=5V to 40V	-	0.05	-	%
Thermal Shutdown	TSD	Activation	-	160	-	°C
Short-Circuit Current	ISC	VIN = 5V	-	1.5	-	A

Instructions for MC33060AD

1. Input Voltage: Ensure the input voltage is within the specified range of 2.7V to 40V. Exceeding this range can damage the device.

2. Output Configuration: The dropout voltage is typically 1.3V. Design your circuit considering this to ensure stable output voltage.

3. Quiescent Current: At no load and an input voltage of 5V, the quiescent current is approximately 60μA. This should be factored into power consumption calculations.

4. Load Regulation: The change in output voltage due to load changes from 1mA to 1A is about 0.2%. This indicates good stability under varying loads.

5. Line Regulation: Changes in input voltage from 5V to 40V cause a typical line regulation of 0.05%, ensuring minimal output voltage fluctuation.

6. Thermal Protection: The device includes thermal shutdown protection which activates at approximately 160°C to prevent overheating damage.

7. Short-Circuit Protection: In case of a short circuit with an input voltage of 5V, the device limits the current to around 1.5A to protect against excessive current draw.

8. Installation and Handling: Follow standard handling practices for electronic components to avoid damage from electrostatic discharge (ESD). Ensure proper heat sinking if operating near maximum ratings.

(For reference only)