Details

---

BUY FP35R12KT4-B15 https://www.utsource.net/itm/p/12535339.html

Parameter	Symbol	Value	Unit
Maximum Drain Voltage	VDSS	1200	V
Maximum Gate-Source Voltage	VGS	±20	V
Continuous Drain Current (Tc = 25°C)	ID	35	A
Continuous Drain Current (Tc = 100°C)	ID	25	A
Pulse Drain Current (Tc = 25°C, 10 μs)	IGM	105	A
RDS(on) at 25°C, VGS = 15V	RDS(on)	65	mΩ
RDS(on) at 100°C, VGS = 15V	RDS(on)	100	mΩ
Input Capacitance	Ciss	2400	pF
Output Capacitance	Coss	170	pF
Reverse Transfer Capacitance	Crss	190	pF
Total Gate Charge	Qg	80	nC
Gate-Source Threshold Voltage	VGS(th)	2.0 to 4.0	V
Junction Temperature Range	Tj	-55 to 175	°C
Storage Temperature Range	Tstg	-55 to 175	°C

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid mechanical damage.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure that the mounting surface is clean and free from contaminants.
   • Apply thermal paste or a thermal pad to improve heat dissipation if necessary.
   • Tighten screws or clips securely but do not over-tighten to avoid damaging the device.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure adequate cooling to keep the junction temperature within the specified range.
   • Use appropriate gate drive circuits to ensure reliable operation.

4. Testing:

   • Use a suitable test setup to verify the device parameters.
   • Measure RDS(on) using a low resistance meter with sufficient accuracy.
   • Test the device under controlled conditions to avoid overstress.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use to protect against moisture and static.

6. Soldering:

   • Follow the recommended soldering profile to avoid thermal shock.
   • Use a temperature-controlled soldering iron and flux-compatible solder.
   • Inspect the solder joints for quality and reliability after soldering.

7. Troubleshooting:

   • If the device fails to operate correctly, check for proper connections and power supply.
   • Verify that the gate drive signals are within the specified range.
   • Check for any signs of overheating or physical damage.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)