Details

---

BUY LM358L https://www.utsource.net/itm/p/12535347.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	3.0	-	32	V
Input Offset Voltage	Vio		-	2	5	mV
Input Bias Current	Iib		-	45	-	nA
Input Offset Current	Iios		-	10	-	nA
Differential Mode Rej.	CMRR		-	85	-	dB
Slew Rate	SR		-	0.5	-	V/渭s
Output Short-Circuit		Continuous	-	-	-	mA
Quiescent Current	IQ	Per Amplifier	-	350	-	渭A

Instructions for Using the LM358L

1. Power Supply Connection:

   • Connect the positive supply voltage (Vcc) to pin 8 and the negative supply (GND) to pin 4.

2. Input Connections:

   • Non-inverting input is on pin 3.
   • Inverting input is on pin 2.
   • For the second operational amplifier, non-inverting input is on pin 6, and inverting input is on pin 5.

3. Output Connections:

   • The output of the first op-amp is on pin 1.
   • The output of the second op-amp is on pin 7.

4. Supply Voltage Range:

   • Ensure the supply voltage is within the specified range of 3V to 32V.

5. Protection:

   • Use appropriate capacitors for decoupling power supplies to minimize noise and transient effects.

6. Operating Temperature:

   • The device is designed to operate over a temperature range from -40掳C to +85掳C.

7. Handling Precautions:

   • Avoid exposing the device to excessive heat or mechanical stress during soldering and handling.

8. Applications:

   • Suitable for general-purpose analog applications such as audio pre-amplifiers, transducer amplifiers, DC gain blocks, and active filters.

(For reference only)