Details

---

BUY 74HC573D https://www.utsource.net/itm/p/12535348.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	6.0	V
Input Low Voltage	VIL	VCC = 4.5V to 5.5V	0.8	-	-	V
Input High Voltage	VIH	VCC = 4.5V to 5.5V	-	-	2.0	V
Output Low Voltage	VOL	IOL = 4mA, VCC = 4.5V to 5.5V	0.1	-	-	V
Output High Voltage	VOH	IOH = -4mA, VCC = 4.5V to 5.5V	-	-	4.4	V
Propagation Delay Time	tpd	VCC = 5V, TA = 25°C	-	12	-	ns
Power Dissipation	PD	Continuous	-	-	100	mW
Operating Temperature Range	TA	-	-40	-	85	°C
Storage Temperature Range	TSTG	-	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range (2.0V to 6.0V) to avoid damage to the device.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Levels:

   • For reliable operation, input voltages should be within the specified input low (V_IL) and high (V_IH) levels.
   • Avoid floating inputs; tie unused inputs to a known state (either V_CC or GND).

3. Output Levels:

   • The output voltages (V_OL and V_OH) are designed to drive standard CMOS and TTL loads.
   • Ensure that the load current does not exceed the maximum output current ratings.

4. Propagation Delay:

   • The propagation delay time (t_pd) is critical for timing considerations in digital circuits. Use this value to ensure proper synchronization of signals.

5. Thermal Management:

   • The device can dissipate up to 100mW of power continuously. Ensure adequate heat sinking if operating at high power levels.
   • Operate the device within the specified temperature ranges (T_A and T_STG) to prevent thermal damage.

6. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection when handling and installing the device.

7. Storage:

   • Store the device in a dry, cool environment to prevent moisture damage and ensure long-term reliability.

8. Pin Configuration:

   • Refer to the datasheet for the specific pin configuration and function of each pin on the 74HC573D.

By following these guidelines, you can ensure optimal performance and reliability of the 74HC573D in your digital circuit applications.

(For reference only)