Details

---

BUY M4Z32-BR00SH1 https://www.utsource.net/itm/p/12535380.html

Parameter	Description	Value
Part Number	Full part number of the component	M4Z32-BR00SH1
Type	Type of memory	NOR Flash
Capacity	Storage capacity	32 Mb (4 M x 8)
Voltage - Supply (Vcc)	Operating voltage range for power supply	2.7 V to 3.6 V
Interface	Interface type	SPI
Clock Frequency	Maximum clock frequency	104 MHz
Package / Case	Package type	WSON-8
Operating Temperature	Range of temperatures in which the device can operate	-40°C to +85°C
Endurance	Number of write/erase cycles	100,000
Data Retention	Duration data is retained	20 years
Write Time	Typical time required for a write operation	3 ms
Erase Time	Typical time required for an erase operation	3 s (chip erase)

Instructions:

1. Power Supply: Ensure the operating voltage is within the specified range of 2.7 V to 3.6 V.
2. Clock Configuration: Set the clock frequency not exceeding 104 MHz to avoid data corruption or loss.
3. Initialization: Before performing any read/write operations, initialize the device using the appropriate SPI commands.
4. Write Operations: Perform write operations after ensuring that the previous operation has completed. Use the Write Enable command before writing.
5. Erase Operations: For bulk erases, use the Chip Erase command and wait for the specified erase time.
6. Temperature Considerations: Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
7. Handling Care: Handle with care to prevent damage from electrostatic discharge (ESD).

(For reference only)