Details

---

BUY CS5523-ASZ https://www.utsource.net/itm/p/12535383.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7	5.0	5.5	V
Supply Current	IDD	Active Mode	-	1.5	-	mA
		Shutdown Mode	-	1.0	-	μA
Differential Input Range	VIN		-	2.5	-	V
Conversion Time	tCONV	16-bit Conversion	-	48	-	μs
Output Data Rate	fODR		0	200	-	SPS
Temperature Range	Toper	Operating	-40	-	85	°C
Storage Temperature	Tstg		-55	-	125	°C

Instructions for Using CS5523-ASZ

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • The typical supply current in active mode is 1.5mA, and in shutdown mode, it is 1.0μA.

2. Input Signal:

   • The differential input range should be centered around 2.5V.
   • Ensure the input signal does not exceed the supply voltage (VDD).

3. Conversion:

   • The conversion time for a 16-bit conversion is typically 48μs.
   • Set the output data rate (fODR) according to your application requirements, with a maximum of 200SPS.

4. Temperature:

   • The operating temperature range is from -40°C to 85°C.
   • The storage temperature range is from -55°C to 125°C.

5. Configuration:

   • Use the appropriate configuration registers to set up the ADC according to your specific needs.
   • Refer to the datasheet for detailed register maps and configuration options.

6. Communication:

   • Interface with the CS5523-ASZ using the SPI or I2C communication protocol as specified in the datasheet.
   • Ensure proper timing and protocol adherence during communication.

7. Power Management:

   • Use the shutdown mode to reduce power consumption when the ADC is not in use.
   • Transition between active and shutdown modes as needed to optimize power efficiency.

8. Calibration:

   • Perform initial calibration to ensure accurate measurements.
   • Periodic recalibration may be necessary depending on environmental conditions and usage.

9. Handling:

   • Handle the CS5523-ASZ with care to avoid static discharge and physical damage.
   • Follow ESD (Electrostatic Discharge) guidelines during handling and installation.

For more detailed information, refer to the CS5523-ASZ datasheet and application notes provided by the manufacturer.

(For reference only)