Details

---

BUY DS1E-S-DC5V https://www.utsource.net/itm/p/12535391.html

Parameter	Description
Part Number	DS1E-S-DC5V
Type	Electronic Switch
Input Voltage	5V DC
Operating Temperature	-40°C to +85°C
Storage Temperature	-65°C to +150°C
Switching Current	Max 2A continuous, 3A peak
Contact Resistance	< 50 mΩ (max)
Insulation Resistance	> 100 MΩ (min) at 500 VDC
Dielectric Strength	1500 VAC (min) for 1 minute
Response Time	< 1 ms
Life Cycle	Mechanical: 10,000 cycles; Electrical: 50,000 cycles
Mounting Type	Through-hole or Surface mount
Weight	5 grams

Instructions

1. Installation: Ensure the DS1E-S-DC5V is installed in a location that adheres to the operating temperature range. For through-hole mounting, insert the component into the PCB and solder the leads. For surface mount, apply solder paste and reflow according to standard procedures.
2. Power Supply: Connect the input voltage of 5V DC to the designated terminals. Verify the polarity before applying power.
3. Handling Precautions: Handle with care to avoid damage from static electricity and mechanical stress. Use anti-static wrist straps when handling.
4. Maintenance: Regularly inspect connections for corrosion or loose contacts. Ensure the switch environment remains within specified temperature and humidity limits.
5. Troubleshooting: If the switch fails to operate correctly, first check the power supply and connections. If issues persist, refer to the manufacturer’s support resources.

(For reference only)