Details

---

BUY MC14529BCP https://www.utsource.net/itm/p/12535403.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	-	3.0	-	18.0	V
Output Current (Sink)	IOL	VOL = 0.4V	10	-	-	mA
Output Current (Source)	IOH	VOH = 2.4V	-	-	10	mA
Input Current (High)	IIH	VIH = VCC - 1.5V	-	-	1.0	μA
Input Current (Low)	IIL	VIL = 0.8V	1.0	-	-	μA
Propagation Delay Time (Typical)	tpd	VCC = 5V, f = 1kHz	-	15	-	ns
Operating Temperature Range	TA	-	-40	-	85	°C
Storage Temperature Range	TSTG	-	-65	-	150	°C

Instructions for Using the MC14529BCP

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 3.0V to 18.0V.
   • Connect the ground (GND) pin to the common ground of your circuit.

2. Input Signals:

   • Apply input signals to the appropriate input pins.
   • Ensure the input current (I_IL or I_IH) does not exceed the specified limits.

3. Output Signals:

   • The output pins can sink or source up to 10mA of current.
   • Use external resistors if necessary to limit current through LEDs or other load devices.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 15ns at V_CC = 5V and f = 1kHz. This value may vary with different supply voltages and frequencies.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device in an environment where the temperature ranges from -65°C to 150°C.

6. Handling and Installation:

   • Handle the device with care to avoid static damage.
   • Ensure proper soldering techniques to avoid thermal stress on the device.

7. Testing:

   • Test the device under the specified operating conditions to ensure it meets the required performance specifications.

By following these instructions, you can ensure reliable operation of the MC14529BCP in your circuit.

(For reference only)